Shoei RF-1400 Origami Helmet

Superb quality, stylishly sleek design and utmost comfort and safety are blended together at the company that's as candid of its trustworthiness as the logo emblazoned on its forehead: Shoei is proud to deliver its latest iteration of the iconic flagship RF lineup, the RF-1400. The RF has been a staple bucket in the moto community since its first introduction in 1984, and years of R&D have led the evolution in safety, design, comfort, noise reduction and just all around good quality that only Shoei is prepared to provide.

Design Concept

The wind tunnel tests have refined the RF's aerodynamics and ventilation to help evolve the design forward. Shoei managed to wring out the RF1200's aerodynamics with a 4% reduction in drag and 6% reduction in lift. The compact, aerodynamic shell shape is made to maximize ventilation as air flows over you while doubling as the lightest SNELL approved full-face helmet in Shoei's new offerings. No rider wants to forfeit important characteristics that most lighter helmets compromise on, such as wind noise. But the RF-1400, while being the lightest in the lineup, leaves no room for earache with its new noise reduction technology.

Quietness

The shape of the spoilered shell was designed in a wind tunnel and through that testing, Shoei was able to provide a quieter shell design while also tweaking the shape of the all new CWR-F2 shield system using their Vortex Generator technology to displace wind turbulence. An all new, airtight window beading system provides a windproof and waterproof seal so tight, you'd think it was your turn to take a crack at opening the pickle jar. The RF-1400 also sports some more voluminous cheek pads and removable ear pads to help soften the "blow" of wind noise. 

Shell and EPS Liner Construction

Proprietary technology integrates a matrix of hand-laid interwoven layers of fiberglass and light-weight organic fibers to deliver a helmet that not only meets SNELL M2020 The SNELL Memorial Foundation is still largely considered the gold standard for helmet safety. SNELL M2020 certification uses the most aggressive anvil profile, known as an edge anvil, and demands a ridiculously low 275 g maximum energy transfer after two blows. SNELL testing is designed with the energy levels and safety requirements of the racetrack in mind, and this is reflected in the additional testing for characteristics such as stability and ease of removal in an emergency. SNELL technicians look for the weakest point in the helmet and target that point when testing. Technicians will strike multiple locations, testing until they are satisfied an accurate indication of the helmet’s energy-management ability has been attained. Also listed as SNELL M2020D. and DOT ratings, but is Shoei's strongest, most elastic shell providing the wearer with optimal impact absorption. Adding to that, the RF-1400 is lined with a dual layer of multi-density EPS foam liner that also aids in impact absorption and allows cool air to flow unrestricted through the channels created in the liner. The precise placement of the EPS material helped shape the RF-1400's compact, lightweight design.

Shield System

Shoei ditched the old baseplates from the RF-1200 and completely reworked the design to bring you the CWR-F2 base plate system. The system's main purpose is to facilitate quicker and smoother shield changes that are just as rewarding as the single "pop" of finally getting the lid off that pickle jar. The new shield adjuster mechanism is smoother and more precise than ever and a redesigned baseplate gear introduces an all-new "first position" shield opening feature for advanced venting and defogging. Shoei didn't stop there though! All new for the RF series is a conveniently located locking mechanism that distributes shield forces across both sides evenly.

The 3D injection molded CWR-F2 shield manages a distortion-free field of vision while protecting your eyes from 99% of the sun's harmful UV rays and the 2D "outside" surface combined with the 3D technology provides an aggressive look without compromising visibility. Pair it with the included, 10% wider Pinlock A Pinlock lens is made to enjoy a fog-free ride. It is based on two key principles to ensure a fog-free vision. The moisture absorbing surface of the lens effectively attracts and stores water molecules, while the airtight seal creates a thermal barrier together preventing condensation of the visor. The system is kept in place by positioning the lens between two adjustable pins, making Pinlock the number one anti-fog solution for helmets. EVO to eliminate fog while also dismissing any woes for lateral visibility.

Interior

The RF-1400 is equipped with a fully removable, washable, replaceable and adjustable interior made from Max-Dry materials to absorb and dissipate sweat two times quicker than traditional nylon. The cheek pad fabric is soft and durable to provide comfort and a plush fit and the voluminous pad material is multi-layered for improved stabilization and keeps decibels down in the helmet. Customize your fit with the optional interior components offered in different sizes.

Ventilation Performance

Pardon us for being a bit long winded here, but we want you to know just how great this helmet is. Let's direct that wind a bit more. The ventilation system has 3 channels to manipulate 6 entryways of air for your comfort: 2 in the center, 2 in the chin bin and 1 on each side of the temples. The relocated center/forehead vent offers an additional air vent hole compared to its predecessor, while the side vents are larger for greater air intake as well. The large, no-fuss 3 position lower vent shutter is easy to use with gloves on while riding and the RF-1400 has a redesigned enlarged exhaust vent with 4 outlets to push the hot air out while getting in all that sweet, cool air.

Summary

Shoei once again has found the right recipe to bring a spectacular helmet at a fair price on the market. The RF-1400 offers more than what most riders seek in a helmet and this latest offering of the flagship presents a wonderful melting pot of a timeless design, aerodynamic performance, ventilation, quietness, ease of use, comfortability and an utmost quality in build, materials and manufacturing that only a Shoei can provide.

Features:

• Lightest Shoei in the lineup
• 4 shell sizes
• Advanced noise reduction
• Dual density EPS liner Expanded polystyrene (EPS) is a rigid, energy absorbing foam. In the helmet industry, EPS is the most common means of energy management to protect the brain. Generic EPS is often referred to as “Styrofoam” (a trademarked name owned by the Dow Chemical Company). Premium helmet producers utilize multi-density EPS liners to balance comfort, safety and performance.
• Superior ventilation
• 3D Max-Dry System II Liner
• E.Q.R.S. (Emergency Quick-Release System)
• CWR-F2 face shield system
• Neatly secured chin strap
• Interchangeable cheek pads between all helmet sizes
• Includes Pinlock EVO pins and lens insert
• Includes breath guard and chin curtain
• Snell M2020 and DOT Certified

Note: Due to manufacturer restrictions, Shoei products can only be shipped to addresses within the United States.