• The forehead area of the shell is reinforced by a super fiber belt which is similar to the way in which bands strengthen a barrel
• PB-cLc² shell is assembled using an assortment of materials
• VAS-A shield system lowered to further improve 'glancing off' ability
• Peak
• Designed for more effective ventilation, increased high speed flow-through performance, greater range of adjustability for blocking the sun, and is more resistant to buffeting, all of which leads to an overall more comfortable riding experience
• VAS-A Shield System
• Allows for easier and faster shield swaps
• The shield can be attached or removed without the need for any tools
• The peak utilizes only one screw on each side for removal/installation
• Mouth Shutter
• Allows for more fresh air without the need for the mesh vents as seen on predecessors
• Inner Shutter
• Working in conjunction with the mouth shutter, the inner shutter allows you to adjust the mount of airflow entering the helmet
• If the inner and outer shutters are both open, the air will be directed towards your mouth
• If the outer shutter is open and the inner closed, the air will be directed towards the shield and help to reduce fogging
• Front Logo Duct
• Allows for airflow that is unaffected by the rider's position
• Allows for holes in the forehead area for this vent without compromising the helmet's ability to protect
• VAS-A Max-Vision Shield
• Preserves the wide field-fo-view and high level of visibility expected of an XD model
• The optional Pinlock® insert for this model has advanced to be effective at resisting fogging, even in extreme conditions, across the entire field of view
• AR Spoiler
• Set in a position that makes it ideal for adventure riding, the AR spoiler contributes to reducing fatigue from turbulent air throughout long rides, and works to draw out hot air from the crown area
• Odor-Resistant Interior
• Has the same level of acidity as bare skin and has odor-resistant and stain-resistant properties
• The head-liner is equipped with a removable foam layer on both the left and right sides, allowing you to remove 5 mm of foam from each side if desired for micro-fitting
• Air Flap
• The retractable pull-down spoiler reduces wind intrusion into the bottom of the helmet and helps to pull out hot and humid exhaled air around the sculpted leading edges of the cheek pads
• This coordinated ventilation combined with fresh intake from the chin vent, also helps to reduce shield fogging
• Device Compatibility
• The Hyper-Ridge® has been re-sculpted to provide a flat surface on the sides to allow for the easy installation of a wide range of communication devices
• This increases bonding surface between the device and the helmet, and helps to reduce buffeting or possible slip-offs
• Speaker Pocket
• Speakers can be installed directly to the provided hook and loop panel without the need to remove the cheek pad covers
• Both ear pockets are deep and wide, designed to accommodate even the thickest speakers with plenty of room to position them to increase comfort
• A pocket to tuck away excess wiring and connectors as well as holes to easily run wires from side to side, have been incorporated into the neck roll to prevent wires coming loose while putting on or taking off the helmet
• Provides a smart way to tackle cable management inside your helmet

Product Info: 

• Our stock photos shown are of the actual item.
• IN STOCK AND READY TO SHIP
• SAME DAY SHIPPING MONDAY - FRIDAY IF ORDERED BEFORE 10AM!!!

Handling Time:

• Handling time on all items is 1 business day. Business days are Monday - Friday excluding holidays.
• Orders are processed daily at 10am EST Monday - Friday, this means if you place your order after 10am EST your order will not be processed until the following business day.

Domestic Shipping:

• Free shipping on most items unless otherwise stated to the lower 48 states. Additional charges for Alaska, Hawaii, Puerto Rico and Guam may apply. We reserve the right to change shipping carrier based on location or for combined orders. This is to ensure your package gets to you as quickly and as well packaged as possible. Our inventory is constantly updating and changing, we do our best to keep it as accurate as possible. However, in some instances seasonal items sell very fast and can be subject to temporary delays. In the case this happens, we place your parts on an emergency restocking order and the item will generally ship within 1 business day. In the event of a prolonged delay we will make our best effort to contact and notify you of such delays. ETA's provided by MX Locker are ESTIMATED TIMES, we aim to get you your order within these time frames however some unforeseen circumstances do arise. We will do our best to work with you to get you your item as fast as possible.

International Shipping:

• We ship worldwide. Limitations due to manufacturer's restrictions on some items may apply. The shipping costs do not include duty or import taxes so please check before you purchase an item. All international items will ship via USPS Priority Mail International or USPS Express Mail International for addition fee. Shipping times will vary depending on the country the item is being shipped to.

Combined Shipping:

• We do our best to combine shipping on orders. If you wish to ensure that multiple items you have purchased are combined please send us a message.

• We offer 60 day free returns!
• Returns must be in NEW/UNUSED condition in ORIGINAL PACKAGING.
• If the part is used there is a possibility that you will not receive a full refund, as we do have to resell the item.
• Electrical parts are NOT returnable.
• All Returns must be authorized by us and you will get a RMA number to put on the outside of the box.
• If an exchange needs to be made we will gladly work with you, however you must pay for shipping to return item AND shipping to get the new item to you.
• In the event that we make a mistake, they do happen occasionally (we are sorry), we will cover shipping costs to get you the correct item.