DESCRIPTION -  This is a good used custom windscreen from my personal 2018 KTM 690 Enduro R. I set it up for quick removal,  just loosen the two 10mm headed bolts and slide it out of the clamps (leaving the clamps on your bars) This will fit any bike with 1 1/8 inch (28mm) Fat bars, but it must clear your front brake hose.  This should clear most KTM brake lines,  but please consider this.   The screen is 16 inches tall and 12 inches wide at the top.  It's about 15 inches wide at the point where the arms mount to the screen.  I made the clamp setup from Cycra Pro Taper inboard handguard mounts. This mounting style give you several degrees of adjustment. I keep it almost vertical, so I put small piece of foam tape between the screen and the front number plate. All of the parts are available for service/replacement from several online sources,  including the windscreen, but I did customize the clamp ends. (bored,  added threads for the 10mm headed grub screws) I did these mods with a mill and lathe, but you could do it with hand tools too.  I added photos of it mounted so you can get an idea of how it would sit on your bike. 

* If any of this listing description doesn't make sense, please send me a message.</</</</</</</</</</</