Motion Pro Pivot Suspension Vise

Motion Pro Pivot Suspension Vise Suspension legs are long and unwieldly. Driving in delicate seals while your fork tubes are protruding from a bucket is no way to live. Give your work space some dignity and professionalism with a proper suspension vise.   Features: Designed to make suspension service simple and quick Holds shocks and forks securely while you change oil, re-valve, or change seals Pivoting head holds parts in any position, with mechanical stops every 45 degrees Aluminum Soft Jaw Vise holds cylindrically shaped parts utilizing a 4 point grip system Large side holds 39mm to 69mm diameter parts Small side holds 14mm to 39mm diameter parts Steel Frame is rigid yet has a small footprint, with 4 pre-drilled holes in the base for secure mounting to a bench Movable fluid catch pan with mesh insert, and threaded drain bung Fork servicing: Soft Jaw Fork Peg holds fork slider up for removal of dust seal and seal retaining clip Repositionable bottom slide bar holds forks compressed while bleeding air (priming cartridge) during reassembly and is an excellent platform for adding, adjusting and taking fork oil level measurements Can be used to assist in removing compression valve assembly (use of stock front axle required) Shock servicing: Holds shock firmly around shock body, shaft or shock reservoir Facilitates removal of piston rod and seal head Facilitates removal of shock reservoir caps, chamber pistons or bladder Holds shock to remove spherical bearings or needle bearings Holds shocks for removal of shock spring