DESCRIPTION - This is a used set of 48mm Open Chamber forks from a 2009 KTM 400 XC-W. These are the best stock forks WP has made in my opinion. I run these 09-14 cartridges in my 2021 forks. This should fit most two and four stroke single cylinder full size KTM's with chains on the left side from 2003-2015. There are a few models that these would work for even later. This should fit several Husqvarna models in 2013-2015 too. For fitment, keep in mind these use 26mm front axle and the point where the fit in the triples is 54mm for the top and 60mm for the bottom. You can run these on 2016+ bikes with 26mm axle, and 26mm axle spacers (your wheel, bearings, and seals would all work). They'll work with 14mm, 18mm, 20mm, or 22mm offset triple clamps. I'm happy to help you figure out fit for your KTM. I have test fit and run all sorts of suspension combinations to figure out what I liked and to figure out what interchanges. Please message me if you're not sure about fit, I'm happy to help and it'll avoid the bummer of returning a part that doesn't work for you. If you contact me I can guarantee fit.
I accept returns for any reason. If you try these out and find they're not right for you just send them back for a refund. I ask that you clean them up and send them back like you received them. All your risking is the shipping cost to give them a try. (shipping cost can add up with to and from, so lets make sure they fit). I will ship these anywhere, contact me if shipping cost doesn't show up for your location.
CONDITION - These are a good used set of forks. I feel zero play in the bushings. I see no serious damage to the chrome on either leg but I do see some small scratches on one (close up in photos). I do see scratches on the upper leg in the area that goes between your triple clamps. It looks like someone scratched them trying to remove an off road registration sticker. I was only able to test ride this bike for a few minutes so I took additional steps to verify the seals were good. I cleaned the dust seals then cycled the forks. I checked the forks once a day for a week to make sure they didn't leak. The seals are soft and I saw no leaks in my testing. All the clickers work like they should and the preload caps do as well. I've included a set of black fork guards. 5 of the fork guard bolt holes are good, one had questionable threads. I used blue 242 loctite on all of them and I think they'll hold just fine. I was on the fence about adding a helicoil, but I'm confident it won't be an issue for you. These forks are a mixed bag, they feel like low hour forks, but they have some cosmetic flaws so I'm pricing them lower than normal. These are ready to run, just install. Please review the pics and assess the condition for yourself as well, see in pics.
RETURNS - I accept returns for any reason. If I've made a mistake, shipping costs are on me. For all other returns, buyers are responsible for shipping costs. Returns aren't fun for either of us, so let's double check fit before making a purchase. I comply with all applicable return policies required by the selling platform. Please send me a message if you have a question about returns.
SHIPPING - I ship Monday through Friday. I try to get most orders shipped out within 1 business day. Orders placed on Friday afternoon will go out on Monday. If you have an upcoming race or ride and have a special shipping request, I'll do my best to make it happen.
FEEDBACK & CUSTOMER SATISFACTION - I strive for PERFECT feedback, please take a moment to understand the feedback system and the consequences of leaving anything but perfect feedback for a seller. Although I do my best to describe accurately, I’m human, sometimes I miss something. Please text or message me with any concern. I'll do my best to offset my mistakes, and in most cases I’ll do whatever you think is fair. I want your MX Locker experience to be excellent!
* If any of this listing description doesn't make sense, please send me a message.