“This crankcase set was removed from a running bike, but has some cosmetic issues. Can be run as is for a cheap replacement or good for parts / repair. All sealing surfaces and bolt holes are intact. No major cracks or damage. Has some nicks and dings in the crank housing area as shown and one small crack forming in the right side crankshaft housing. Stator wiring rubber plug area on the left case has two small chips. Main bearing bore has some small nicks, but bearings fit tight and function without issue. Drain bolt threads are intact, but will need the rubber sealing gasket (PN: 92065-058) $4 new OEM. Overall there are no major issues that would prevent the use of this case set, however they are not perfect cosmetically.”