XKGLOW XKcommand Off-Road Switch Panel

XKGLOW XKcommand Off-Road Switch Panel

Take control of your ride with the XKCommand switch panel! This extraordinary off road switch, controlled by a cutting-edge Bluetooth app, unveils a new age of control, personalization, and seamless synchronization of a vast array of 12v accessories. 

Features:

• Dual control with the switch panel & Bluetooth-controlled XKcommand app
• Switch panel buttons/switches can be configured/programmed with a mobile app
• 3 programmable sensor wires to trigger actions by tapping into the vehicle wire source
• Wire all your lighting accessories into the XKcommand Hub
• Customizable RGB switch panel backlight. DIY button with icons, images, or text
• Configurable & resettable fuse for each output channel
• Low voltage auto-shutoff protection
• Eight 15A output channels
• Output channels can be combined in the app for higher amperage output
• Compatible with most 12V offroad lighting accessories such as light bars, cube lights, etc
• Waterproof with an IP67 rating
• 3 year warranty

Exclusive XKcommand app Features:

• Toggle On and Off modes with a light switch
• Dimming mode available
• 6 flash/strobe light patterns - Each lighting pattern has an opposite version to create a wig wag pattern
• One light switch can control multiple channels & each channel can perform the same or different pattern upon your choice
• Can be set as a momentary switch (Linked channel turns off when the button is released)
• Assign an icon, image, or name for each button/switch to easily identify the configured function

Tech Specs:

• Max current per channel: 15A (To reach higher amp, link multiple channels under control of one button)
• Input Voltage: 9-16 volts
• Sensor wire input: 9-16V for red, green and blue wires (programmable sensor wires,) 3-16V for white wire (ignition sensor wire)
• Common 12V system
• Bluetooth 4.0 Low Energy
• Android 4.4 Version or higher / iOS 9 or higher required

Note: If you use XKcommand with a winch, hoist, or other electric motor, you MUST use a relay. The motor cannot be directly connected to the XKcommand Hub