☆MAX MOTORSPORTS ☆ ☆ FAMILY OWNED/OPERATED IN THE USA ☆ Please Check out our Store MAXVR6 for other great items. We offer our carb vent hoses in over 20 colors and different lengths, FCR Inlet O-Rings, fuel line, and cap vents! ☆ BEWARE ☆ Others are selling 1/8" (3.2mm) I.D. tubing. THIS IS THE WRONG SIZE for full-size bikes! It has to stretch too far, could rip over time and is more prone to clogging. Our I.D. is 4mm..same ID as factory hose! The 8.5' kit leaves very little room for error. One wrong cut and you might need replacement hose. Our 10' kit provides plenty of hose for a complete job. Keihin / Mikuni Carburetor Overflow Vent Lines. This listing is for 9' Uncut 4mm Hose and 14" of 3.2mm bowl drain hose. Hi-Gloss - SOLID RETRO NUCLEAR RED/PINK..a Great Finishing Touch To Any Carb Rebuild! ITEM DETAILS: Universal Hose Kit. For almost all 2-STROKE OR 4-STROKE carbs requiring 5 vent hoses. Also, this will work on most bikes requiring up to 6 vent hoses 4mm ID - 9' Foot Uncut length w/ 14" drain hose - SOLID RETRO NUCLEAR RED/PINK w/2 zip ties and factory heat shrink for top hoop Some carbs require a smaller 1/8" bowl drain. We include it in our kit. 9' (nine feet) of regular I.D. hose and 14" (fourteen inches) of 1/8" ID hose will be sent (color may differ) **Clamps are not included** Our hoses fit so snug you will not need clamps or ties..or if you prefer, you can reuse your old clamps High-Quality Poly Tubing made in the U.S.A. Kink and Sun/UV Resistant Repels Water and Dirt - Easy Clean-off with Soap and Water Please take a look at the pictures provided as they are also part of the description and do your homework to ensure you are purchasing the correct product for your bike Heat (AWAY FROM ALL FUEL SOURCES) and pliers assist with installation. DO NOT use grease or WD-40. This could cause your hose to slip off the barb after installation. Carburetor is for demonstration purposes and is NOT INCLUDED. We use 2-stroke OR 4-stroke carbs for our pictures. Our hoses work on both.